KS audio SAT 3.0

5 775,03 €

KS audio CB 18

Active 18″ bass reflex subwoofer
Built-in 1200 W amp for the subwoofer + 2x 400 W for the corresponding KS C10 top
Output for matching Slave Sub CW18
Built-in DSP with FIR filter
Direct USB connection to the subwoofer for EQ and limiter settings (presets can be stored)
M20 flange
Dimensions: 540 x 540 x 660 mm
Weight: 37 kg

<td “background-color:=”” coral;”=””>SAT 3

Specifications

Frequency response	38 – 19.000Hz ±3dB

Max. SPL (1m, free field)	134dB – complete system

Dispersion subwoofer	Omni-directional

Nominal horizontal dispersion	120° nearfield down to 60° into the farfield

Nominal vertical dispersion	35° with 5° down-angle

Transducers	One CB 18 – One 18″ ND cone
	Two C 1 – One 10″ ND cone / One 1.75″ ring diaphragm compression driver

Acoustic Principle	CB 18 – Bass-reflex
	C 1 – HDSP™ High Definition Sound Projector
	in addition bass-reflex for low frequencies

Power handling AES RMS/peak	Mono LF: 1200W / 2400W
	L/R C 1: 500W / 1000W

CB 18 subwoofer

Amplifier	Integrated: 4 powerstages, 4-channel PWM amplifiers, 2 in bridge-mode woofer
	Additionally 2 PWM amplifiers in bridge for external subwoofer CW 18
Power Supply	SMPS (Switched Mode Power Supply) with power factor correction (PFC)
DSP	32-bit, floating point, 192 kHz Sampling frequency
Filter Technology	IIR and FIR filters, delay adjustments, contour filters and x-over

Power input	powerCON in 110-240V 50-60Hz
Signal input	XLR3-F Analog/AES-EBU autoswitch
	RJ45 Ethernet 1G T Base for KS AUDIO Remote Control

Dimensions (H x W x D)	540 x 540 x 660 mm
	21.2 x 21.2 x 25.9”

Weight	40 kg
	88.0 lb

C 1 full-range

Crossover	Passive 2-way

Nominal impedance	8 Ω

Connectors	Two speakON NL4

Dimensions (H x W x D)	516 x 298 x 330 mm
	20.2 x 11.7 x 12.9”

Weight	17.0 kg
	37.4 lb